What are the 5 best options for nonconformance management software in 2024?

     

    The right investment in nonconformance management software can make a good regulated company into a great one.

    Choose the right software and you can streamline and master your non-conformance monitoring and fixing processes. Suboptimal non-conformance management, on the other hand, brings skyrocketing costs, recurring issues and defects, FDA warning letters and even regulatory fines.

    The 'cost of conformance' is an operating cost for organizations in FDA-regulated industries such as life science. Edward Chung defines conformance costs as the activities required to ensure a product conforms to quality requirements and avoids failure. These include the costs of building quality into processes, appraisal costs, and prevention costs.

    The right software can empower your organization to prevent expensive non conformances, streamline conformance management and improve your quality processes.

    Our own product includes non-conformance management, so we have an obvious bias! But here are a few options in addition to Qualio we would recommend assessing for your nonconformance software scoping journey.

     

    Table of Contents

    1. Nonconformance regulations
    2. Nonconformance and Corrective and Preventive Action (CAPA)
    3. What is nonconformance software?
    4. Nonconformance management software: why you need it
    5. The 5 best nonconformance management software systems in 2024
      1. Intelex
      2. Pilgrim
      3. Qualityze
      4. Verse Systems
      5. Qualio
    6. Creating a culture of quality with your nonconformance system

     

    Nonconformance regulations

     

    To explore what 'nonconformance' means, let's look at what the regulators have to say on the matter.

    The highly regulated medical device industry offers a good framework for understanding what nonconformances are, and how to treat them. The word 'conformity' is mentioned throughout the internationally agreed medical device quality management system standard ISO 13485:2016 and the United States Food and Drug Administration (FDA) Code of Federal Regulations, 21 CFR Part 820. In fact, both the standard and the CFR have entire sections dedicated to nonconforming product, highlighting how important the control of nonconforming product for medical devices is within an organization.

     

    Key points from the regulations

     

    Important points in the regulations about managing nonconforming product include:

    • Identifying and controlling the product, so that it’s not used unintentionally or sent for delivery. This is typically a quarantine area where the product is segregated and labeled with a distinct quarantine label to ensure product mix-up does not occur.
    • A procedure needs to be created to ensure proper controls have been established. The procedure must also include information on the responsibilities/authorities for the identification, documentation, segregation, evaluation and disposition of nonconforming product.
    • When the nonconformance is being evaluated, a decision needs to be made as to whether or not an investigation is needed. Furthermore, the party responsible for the nonconformance must be notified.
    • Nonconformances need to be documented and maintained.
    • Products that have been reworked must meet acceptance criteria and regulatory requirements. Records of rework need to be maintained, specifically in the Device History Record (DHR) when complying with FDA regulations.

     

    Nonconformance software, to work effectively, must allow your organization to perform these activities.

     

    Nonconformance and Corrective and Preventive Action (CAPA)

     

    It's important to know when a nonconformance needs to be escalated into a CAPA. This decision should be based on the severity of the issue, its regulatory impacts, and how often it occurs. 

    When a nonconformance is escalated into a CAPA, there should be an investigation to determine the root cause of the problem and corrective actions put in place to stop it from happening again. The goal of a CAPA is to prevent the issue from recurring. If the root cause cannot be determined, then multiple corrective actions may need to be put in place to mitigate the risk of the issue occurring again. Preventive actions can also be implemented if unfavorable trends have been identified in the product and/or processes, thus preventing a nonconformance from occurring in the future.

    Documenting the decision-making process is important. This documentation can be used to show that the company is proactive in addressing quality issues and that they value continuous improvement within the organization. It can also be used to defend the company against potential liability in the event of a patient injury or death. 

     

    CAPA and nonconformance management software

     

    CAPAs can be challenging to close out because they often require changes to processes or products. It's important to have a robust system in place to track CAPAs and ensure they are closed out in a timely manner. There are many software solutions available to help companies manage nonconformances and CAPAs. Which brings us to...

     

    What is nonconformance software?

     

    In a nutshell, nonconformance management software provides a digital framework for the identification and management of nonconformances within the context of your quality management system (QMS).

    A non-conformance can also be known as a nonconformity or a defect. It's any deviation from an expected process or result in your organization.

    Example non conformances include:

    • Documented procedures not being followed
    • Employees not being fully trained
    • Manufactured product exceeding its variance parameters
    • Not adhering to GxP

     

    The more nonconformances your business experiences, the less trusted, standardized, reliable and quality-centric it will be.

    Regulators like the FDA audit regulated companies to look for nonconformances. If they find them, they issue a Form 483 telling you what needs fixing.

    The FDA's inspection observations database is therefore a great place to look to find out where companies most commonly trip up, and which non conformances the FDA notes most often.

     

    Read our guide to the MDSAP's nonconformance grading system for inspiration of how to score your nonconformances

     

    Although it's theoretically possible to manage your nonconformances using legacy quality management tools like paper and spreadsheets, quality-centric regulated companies are embracing software as a faster, stronger and more efficient way to treat their non conformances.

    Rather than manually populating spreadsheets with completed actions, or filing onerous and leaky CAPA paper records, digitized non-conformance management offers automated and standardized processes that cut out admin and allow issues to be fixed more quickly.

    Non-conformance software should include all features and functionality necessary to identify and resolve your internal and external nonconformance issues.

    These include support for identification, remedial action, root cause identification and CAPA, including the generation of corrective actions to fix your identified defects.

    Any reputable nonconformance software should give you the flexibility to configure your own remediation steps, allowing you to fix your nonconformances in the way that makes the most sense and impact for you.

    Your non-conformance software system should provide a clear and logical database of your nonconformances, allowing at-a-glance visibility of which issues have been fixed, which CAPA steps are in progress, and so on.

    And the most mature and modern nonconformance software offerings, such as Qualio, even offer API integration with your other business tools like Salesforce - allowing customer issues and non conformances to flow instantly into your eQMS for fixing and close-out.

     

    Nonconformance management software

     

    A nonconformance management software may be a standalone solution or a component of a broader QMS software system.

    But regardless of whether it's a point solution or part of a suite, nonconformance software should address your operational risks and allow stakeholders to browse non-conformance notifications, reminders and escalated issues related to your defects and nonconformances.

     

    Nonconformance management software: why you need it

     

    It's simple: if you get faster and better at fixing non conformances with a digital software system, your company gets stronger.

    Mistakes get fixed and don't recur.

    Your product gets safer, more effective and more likely to secure regulatory approval.

    And your processes get wastage, defects and weaknesses ironed out of them.

    The right nonconformance software can therefore deliver multiple operational benefits to your company, including:

    • A safer and more effective product
    • Faster entry to market
    • Lower cost of poor quality (COPQ)
    • Improved consistency
    • Stronger collaboration and mistake-fixing
    • Better risk response
    • Stronger compliance

     

    RELATED READING: 13 bottom line-boosting benefits of a quality management system

     

    Expect nonconformances to be audited!

    An auditor will want to see how your company handles nonconformances. When you encounter a nonconformance, it's important to be proactive, be prepared and follow your procedures. Nonconformance software is a great way to simplify and speed up this activity.

    Here are some important steps to take with nonconformance software when you've identified a nonconformance:

    1. Initiate a nonconformance report (NCR). A nonconformance report should be initiated as soon as possible after the nonconformance is identified. We'll review the contents of a nonconformance report later on.

    2. Segregate nonconforming product immediately. Ensure access is not easily granted to quarantined product and have someone visually confirm that all affected product has been removed from production and labeled appropriately. Don't wait for a nonconformance report to be initiated to segregate the nonconforming product, even if you’re not sure the issue is a nonconformance. It's better to be proactive in preventing potential nonconforming product from getting out in the market than to wait until it’s too late.

    3. Investigate. Once the nonconformance report has been initiated, it's important to investigate the root cause of the problem. This will help you determine what actions need to be taken to prevent similar nonconformances from occurring in the future. If the issue has already occurred, and an investigation was conducted, then you don’t need to perform another investigation, but you should evaluate if a corrective and preventive action (CAPA) needs to be opened.

    4. Know the difference between a correction and a corrective action and proceed accordingly. A correction is when an action is taken to eliminate a nonconformity. Corrective action is when an action is taken to eliminate the cause of the nonconformity and prevent its recurrence.

    5. Set up a Material Review Board that meets regularly to discuss and evaluate the nonconformances raised. Use nonconformances to continually improve your product and processes. Learn from errors and always strive for safe, effective products for customers.

     

     

    The 5 best nonconformance management software systems in 2024

     

    1. Intelex

     

    Intelex is an environmental health and safety application (EHS) designed for compliance with OSHAS 18001 and CAPA in numerous fields, including organizations with complex requirements such as water quality management, waste management, and permit management. The solution includes support for documents, training, audits, inspections, and risk assessment, including a comprehensive CAPA suite to address nonconformance issues.

    Pros

    • Highly sophisticated and extensible platform for multiple industries
    • Provides multi-lingual support for global organizations
    • Adoption may require custom development using Intelex developers
    • Easy-to-learn reporting module and incident workflow features

     

    Cons

    • Frequently requires customization or configuration to meet industry requirements or use cases
    • Extensible platform necessitates clear solution design
    • Some users on Software Advice report minor user interface (UI) frustrations

     

    One implementation partner on Software Advice recommends Intelex for the needs of “complex corporations” in multiple industries due to the platform’s extreme potential for customization and configuration to meet many different use cases and potential to act as a robust solution for environmental health and safety. Free trials of Intelex are available by request

     

    2. Pilgrim

     

    Chances are, you've heard of IQVIA QMS--the parent brand behind Pilgrim Quality Solutions and SmartSolve® Nonconformance Management software. This SaaS application for nonconformance management is designed to create automation in risk-focused conformance management by managing quality, suppliers, and regulatory risk. Pilgrim includes workflows, document management, process management, analytics, and validation features.

    Pros

    • Offers flexible workflow configuration to meet the needs of small or large organizations
    • Comprehensive, easy-to-use documentation for self-service
    • Intuitive user interface and dashboard features
    • Users report satisfaction with customer support experience

     

    Cons

    • Workflows can quickly become "cumbersome" according to user reviews
    • Users report limited implementation, data validation, and training support
    • Limited functionality without the purchase of full QMS product
    • Users say data quality and change control issues resulting from a non-normalized database

     

    Pilgrim Quality Solutions may be an appealing option for organizations with the internal resources necessary for data validation who want nonconformance management software as part of a comprehensive QMS suite. Product demos are available.

     

    3. Qualityze

     

    Qualityze is an eQMS cloud solution which, according to the vendor, is adopted by manufacturing customers of all sizes in many different highly regulated industries including automotive, defense, and logistics. Qualityze offers a comprehensive eQMS suite of products, including management features for nonconformance, CAPA, change, audits, training, and documentation. Nonconformance features are defined as "the ability to identify and document an issue" and "analytics." Pricing is transparently posted online beginning at $20 per user per month.

    Pros

    • Online user reviews report fast time-to-implementation and intuitive software
    • Built on Salesforce
    • Efficient, streamlined workflows and simplicity
    • Closed-loop management processes

     

    Cons

    • User reviews report the need for additional feature expansion
    • Limited online user reviews

     

    Qualityze may be the right solution for your organization if you are searching for simple nonconformance software as part of a cloud-based for use in a highly regulated manufacturing field and you're willing to work closely with the vendor to determine goodness-of-fit based on client success stories at organizations which resemble your own. Qualityze offers a demo and a 1-week free trial to prospective clients.

     

    4. Verse Solutions

     

    Verse is an integrated solution for EHS and good manufacturing practices (GMP) which is categorized as total quality management (TQM) software for organizations in highly regulated industries.

    There are several versions of Verse, including Verse for Life Sciences organizations. Verse for Life Sciences is designed to create an "audit-ready" state with features for handling complaints, corrective action, risk management, and compliance. Software reviews online which address solution pros and cons are focused primarily on Verse Standard, as opposed to implementations of Verse for Life Sciences.

    Pros

    • Users report the solution offers excellent value for the cost
    • A wide array of modules and rich features
    • Provides automation for enterprise quality systems and processes

     

    Cons

    • Users report implementations ran significantly longer than expected due to poor support
    • One user reported a failed implementation due to poor vendor support
    • A third user reported poor communication with the support team

     

    Verse may be worth exploration if your organization is seeking a solution specifically designed for life sciences. The vendor offers a free, customized demo.

     

    5. Qualio

     

     

    Qualio is an all-in-one (QMS) designed as a single, efficient, and automated cloud platform for organizations in pharma, life sciences, and medical device industries.

    Qualio offers comprehensive QMS features which include training, document management, closed-loop quality, product development, and quality event analysis, including nonconformances.

    Customers are empowered to proactively address quality events like deviations, non conformances and customer complaints with features for investigation, root cause analysis, outcome validation, and closure. Qualio's nonconformance features also allow organizations to assign CAPA-related tasks, track progress, monitor quality trends, and link conformance-related activities.

    Pros

    • User reviews report simplicity and ease of configuration
    • Described by adopters as "the perfect software for startups and young organizations."
    • Customers report real operational benefits such as slicing a full 3 days from every single nonconformance resolution, compared to previous ways of working
    • Integrates with Salesforce to pull reported customer issues straight into your eQMS for remediation
    • Simplifies compliance with audit-ready reporting
    • Users report satisfaction with making feature and improvement requests to the support team
    • One adopting organization reported the business benefits of “swift” SOC certification, increased customer trust, and bottom-line growth

     

    Cons

    • Users report an occasional need to conduct sophisticated data reporting in external business intelligence tools

     

    Qualio may be the right choice for your organization if you are a small to midsize life sciences company looking to establish a quality-driven culture and scale your non-conformance system as you grow.

     

    Download our datasheet to learn more about

    managing your nonconformances with Qualio

     

    Creating a culture of quality with your nonconformance system

     

    Failure to discover quality issues and product deviations can result in recurring non conformances which bring regulatory risk, erosion of customer trust and reputational damage.

    Conformance costs are part of doing business in any quality-driven, highly regulated industry. But a smart nonconformance management software investment can enable you to build conformance management, identification and resolution into your business processes and manage costs and quality closely and proactively.

     

    Book a demo with us to see our

    nonconformance management software in action